120 Grooved 45º Elbow
SIZE RANGE
|
DN25 to DN300 (1" to 12")
|
MAXIMUM WORKING PRESSURE
|
34.4 bar (500 psi)
|
RADIUS TYPE
|
Standard
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS
|
Grooved couplings and fittings are used in assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL and VdS approved. The type 45 elbows are pressure rated to 500psi and are used when a change or direction is required in the pipework. They can be used in standard and thin walled pipes.
130 Equal Tee
SIZE RANGE
|
DN25 to DN300 (1" to 12")
|
MAXIMUM WORKING PRESSURE
|
34.4 bar (500 psi)
|
RADIUS TYPE
|
Standard
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS
|
Grooved couplings and fittings are used in assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL and VdS approved. The type 130 equal tees are pressure rated to 500psi and are used to create an oulet or a change of direction is required in the pipework. They can be used in standard and thin walled pipes.
Standard Rigid Coupling
SIZE RANGE
|
DN25 to DN300 (1" to 12")
|
MAXIMUM WORKING PRESSURE
|
34.4 bar (500 psi) 34 bar (450 psi) 20.6 bar (300 psi)
|
WORKING TEMPERATURE
|
-34°C to 110°C (-30°F to 230°F)
|
GASKET TYPE
|
EPDM
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS, CNBOP, Gost
|
Grooved couplings and fittings are used in the assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL, VdS,LPCB
and CNBOP approved. The standard duty rigid couplings are pressure rated up to 500psi (depending on size) and are used where no movement in the system pipework is expected.
240 Grooved Concentric Reducer
SIZE RANGE
|
DN32 x DN25 to DN250 x DN200 (1¼" x 1" to 4"x3")
|
MAXIMUM WORKING PRESSURE
|
34.4 bar (500 psi)
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS
|
Grooved couplings and fittings are used in assemby of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL and VdS
approved. The type 240 concentric reducers are pressure rated to 500psi and are used where a reduction of pipe size is required. They can be used with standard and thin walled pipes.
300 End Cap
SIZE RANGE
|
DN25 to DN300 (1" to 12")
|
MAXIMUM WORKING PRESSURE
|
34.4 bar (500 psi)
|
MATERIAL
|
Ductile iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS
|
Grooved couplings and fittings are used in the assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL and VdS approved. The type 300 threaded end caps are pressure rated to 500psi and are use to cap pipework. They can be used in standard and thin walled pipes.
300PX Cap with Eccentric Hole
SIZE RANGE
|
DN80 x DN40 to DN200 x DN50 (3" x 1½" to 8" x 2")
|
MAXIMUM WORKING PRESSURE
|
34.4 bar (500 psi)
|
MATERIAL
|
Ductile iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed
|
Grooved couplings and fittings are used in the assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM and UL approved. The type 300 end caps are pressure rated to 500psi and are use to cap pipework. The end cap has a threaded hole to allow for connection of threaded pipe or test and drain valves. They can be used in standard and thin walled pipes.
321 PN16 Grooved Flange
SIZE RANGE
|
DN40 to DN250 (1½" to 10")
|
MAXIMUM WORKING PRESSURE
|
15.5 bar (225 psi)
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS
|
Grooved couplings and fittings are used in assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL and VdS
approved. The type 321 PN16 grooved flanges are pressure rated to 225psi and are used where a connection to flanged pipe is required. They can be used in standard and thin walled pipes.
321G PN16 Grooved Adaptor Flange
SIZE RANGE
|
DN50 to DN250 (2" to 10")
|
MAXIMUM WORKING PRESSURE
|
15.5 bar (225 psi)
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS
|
Grooved couplings and fittings are used in assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL and VdS
approved. The type 321 PN16 grooved flanges are pressure rated to 225psi and are used where a connection to flanged pipe is required. They can be used in standard and thin walled pipes.
3G Mechanical Tee Grooved Outlet
SIZE RANGE
|
DN50 x DN32 to DN100 x DN32 (2" x 1¼" to 4" x 3")
|
MAXIMUM WORKING PRESSURE
|
20.7 bar (300 psi)
|
WORKING TEMPERATURE
|
-34°C to 110°C (-30°F to 230°F)
|
GASKET TYPE
|
EPDM
|
OUTLET CONNECTION
|
Grooved
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS, CNBOP
|
Grooved couplings and fittings are used in the assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL Vds and CNBOP approved. The type 3G Mechanical tees are pressure rated to 300psi and are used to create a quick and easy pipe oulet. They can be used in standard and thin walled pipes.
3L U-Bolt Mechanical Tee
SIZE RANGE
|
DN32 x DN15 to DN65 x DN25 (1¼" x ½" to 2½" x 1")
|
MAXIMUM WORKING PRESSURE
|
20.6 bar (300 psi)
|
WORKING TEMPERATURE
|
-34°C to 110°C (-30°F to 230°F)
|
GASKET TYPE
|
EPDM
|
OUTLET CONNECTION
|
Threaded
|
MATERIAL
|
Ductile Iron
|
FINISH
|
Red painted or Galvanised
|
APPROVALS
|
FM Approved, UL Listed, VdS, CNBOP
|
Grooved couplings and fittings are used in the assembly of grooved piping systems. They are available in painted and galvanised finishes and are FM, UL, VdS and CNBOP approved. The 3L U bolt type tee is pressure rated to 300psi and is used to create a quick and easy pipe oulet. They can be used in standard and thin walled pipes.