The manual actuator is used to mechanically operate the system at the container position. Accidental manual release is prevented by means of a steel safety pin. The steel safety pin must be removed to allow the use of the local manual actuator. After removing the steel safety pin, manual operation is caused by pulling the lever in the direction indicated by the arrow embossed on the units
body.nThe unit is designed so that it may be fitted directly onto the pilot cylinder to enable pneumatic actuation of the iFLOW
container valve.

Technical Specification
Body: Brass
Safety Pin: Steel
Lever: Brass
Swivel Nut: Brass
Nominal Stroke: 6 mm
Min / Nom / Max Trigger Pressure: N/A
Weight: 0.49 kg
Working Temperature Range: -20 °C to 50 °C
Testing of Actuator: Possible
Approvals: LPCB, VdS
Certification: EN 12094-4
CE Certification Number: 0786-CPD-30062
Year of CE Marking: 2012
CE Marking Requirements: Manufacturer, Part Number,
Serial No, CE0786
Method of Marking: Engraving
Overall Size: 82 mm x 72 mm