Router VIT02 performs the functions of a repeater (retransmitting the radio signals in the network) and controls conventional sounders or fire protection and fire alarm equipment, through a programmable fire relay output.
PRODUCT DESCRIPTION
Router VIT02 performs the functions of a repeater (retransmitting the radio signals in the network) and controls conventional sounders or fire protection and fire alarm equipment, through a programmable fire relay output.
It is power supplied by alternating voltage 220 V/50 Hz and has a space for backup battery (not included), supporting its operation in case of fault in the external power supply.
 |
Instruction manual VIT02 – rev.6 |
|
Brochure VIT02 |
Technical data
Supply voltage:
Mains supply: 220/230V ( 50/60Hz )
Back up battery:
– Back up battery type: lead, gel electrolyte
– Nominal voltage/capacity of the back up battery: 12 V/1,2 Ah
– Discharged battery voltage: 9 V DC
– Charge battery voltage: 14 V DC
– Consumption on back up battery supply in: < 60mA max
– Duty Mode peak value at 12 V
Power supply output: 1 pc
– Voltage: 24( +2/-4 )V DC
– Maximum current value: 400 mA
Monitored output for fire condition: 1 pc
– Type: potential
– Electrical characteristics: 24( +2/-4 )V DC
Indication of the registered events – Light indication: LED (yellow, green and red LED)
Cross section of the connecting wires: (0,8 –1,5) mm2
Response time: 30 sec.
Degree of protection: IP50
Operating temperature range: minus 10oC up to 55oC
Relative humidity resistance (no condensation): ≤ 95%
Overall dimensions (excluding the antenna): (130 х 170 х 80) mm
Weight, excluding the back up batteries, not more than: 0,400 kg
021-44894049-44894059
